Shanghai Powermax Fastener Co., Ltd.
Shanghai Powermax Fastener Co., Ltd. Quality first, Clients first.
Add to Cart
ASTM A194 Grade 7L alloy steel 1.1/8 inch UNC heavy hex nuts
Hexagonal Heavy-series nuts used with stud bolt. Heavy hex nut dimensions in inches are covered in ASME B18.2.2 Square and Hex Nuts, however, the dimensions in matrix unit are covered in ASME B18.2.4.6M Heavy Hex Nuts.
Heavy hex nut coatings include zinc, zinc yellow and hot dipped galvanized. We offer heavy hex nuts in standard (inch) and metric sizes ranging from ¼ to 4 inches.
SIZE: 1/4" - 4", M6 -M100 .
STANDARD: ASME B18.2.2
THREAD: ASME B1.1 , UNC, UNF, UN8
FINISHED: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Chrome, H.D.G.
A194 Grade 2:Carbon steel heavy hex nuts.
A194 Grade 2H:Quenched and tempered carbon steel heavy hex nuts.
A194 Grade 7:Quenched and tempered alloy steel heavy hex nuts.
A194 Grade 7L:Quenched and tempered alloy steel heavy hex nuts, Charpy impact tested.
A194 Grade 8:Stainless AISI 304 heavy hex nuts.
A194 Grade 8M:Stainless AISI 316 heavy hex nuts.
NOTE: There are other grades of A194. Those listed here are the ones we receive the most requests for. For information on other types, Please contact us.
| A194 CHEMICAL PROPERTIES | ||||
| Element | 2, 2H | 7 | 8 (AISI 304) | 8M (AISI 316) |
| Carbon | 0.4% min | 0.37 - 0.49% | 0.08% max | 0.08% max |
| Manganese | 1.0% max | 0.65 - 1.1% | 2.0% max | 2.0% max |
| Phosphorus, max | 0.04% | 0.04% | 0.05% | 0.05% |
| Sulfur, max | 0.05% | 0.04% | 0.03% | 0.03% |
| Silicon | 0.40% max | 0.15 - 035% | 1.0% max | 1.0% max |
| Chromium | 0.75 - 1.2% | 18.0 - 20.0% | 16.0 - 18.0% | |
| Nickel | 8.0 - 11.0% | 10.0 - 14.0% | ||
| Molybdenum | 0.15 - 0.25% | 2.0 - 3.0% | ||
| A194 MECHANICAL PROPERTIES | ||||||
| Grade | Marking | Size | Tempering Temp.Fahrenheit | Proof Load Stress, ksi | Hardness Brinell | |
| Min | Max | |||||
| 2 | 2 | 1/4" - 4" | 0 | 150 | 159 | 352 |
| 2H | 2H | 1/4" - 1-1/2" | 850 | 175 | 248 | 327 |
| 2H | 2H | 1-1/2" - 4" | 850 | 175 | 212 | 327 |
| 7 | 7 | 1/4" - 4" | 1100 | 175 | 248 | 327 |
| 8 | 8 | 1/4" - 4" | - | 80 | 126 | 300 |
| 8M | 8M | 1/4" - 4" | - | 80 | 126 | 300 |
Notes:
The markings shown for all grades of A194 nuts are for cold-formed and hot-forged nuts. When nuts are machined from bar stock, the nut must additionally be marked with the letter B. The letters H & M indicate heat-treated nuts.
Properties shown are those of coarse and 8-pitch thread heavy hex nuts.
